Tool Holders - Page 3 - Mega Sale! Save up to 28%


Mega Sale! Up to 28% off on Tool Holders at Group Publications, Page 3. Top brands include onestops8, C.S. Unitec, Accusize Industrial Tools, HHIP, SFX, tpactools, Tapmatic, Kyocera, Dorian Tool, Amana Tool, SCM, Lyndex-Nikken, Exact Tooling, Global SCM, findmall, RedLine Tools, & PRO IRON GEAR. Hurry! Limited time offers. Offers valid only while supplies last.



8 PCS MT3 Quick Change Collet Chuck End Mill Holder 1/8'' to 1'' Spring Collets
8 PCS MT3 Quick Change Collet Chuck End Mill Holder 1/8" to 1" Spring Collets
By onestops8
In Stock
$120.68
$120.67

ean: 0742177055390,

4.6 out of 5 stars with 17 reviews
SPECIFICATIONS: 8 pcs. sets includes a collet chuck, 1/8'', 1/4'',3/8'',1/2'', 5/8'', 3/4'' and 1'' collets, spanner wrench and molded plastic case. Draw bar: 12MM.A. Switch out end mills the easy way-just attach the quick-change collet. chuck to your mill and slip your end mill into appropriate collet.. B. Spring collets are hardened and ground for maximum holding power and ultra precision.


CS Unitec ZFR 452.3 2.5 mm Milling Head for The EKF 452.3
CS Unitec ZFR 452.3 2.5 mm Milling Head for The EKF 452.3
By C.S. Unitec
In Stock
$265.31

mpn: ZFR 452.3,

4.9 out of 5 stars with 53 reviews
2.5mm Milling Head for the EKF 452.3. Click on the CS Unitec link at the top of this page to see more quality products from CS Unitec.2.5Mm milling head. Fits CS Unitec EKF Portable Hand-Held Beveling Machines. Made in Germany.


Accusize Tools - for Lathe Swing 6-12'', AXA, Wedge Type Quick Change Tool Post, 0250-0111
Accusize Tools - for Lathe Swing 6-12", AXA, Wedge Type Quick Change Tool Post, 0250-0111
By Accusize Industrial Tools
In Stock
$132.80

mpn: 0250-0111,

4.3 out of 5 stars with 38 reviews
A: 2-1/2'', B: 3-7/8'', C: 2-1/4'', D: 9/16'', E: 1-3/8'', H: 4-11/16'', R: 5-3/4'', L1: 1.691'', L2: 1.250'', H: 0.382''Precision engineered to assure repetitive accuracy.Advanced design provides built-in quick tool changing versatility with positive rigidity to meet the most exacting tolerances.Quickly and easily installed on an engine,bench, or turret lathe for a wide range of operations,from fine precise work to heavy duty cutting.Accepts toolholders and interchange with Aloris, Dorian,and


HHIP 3900-5090#40 NMTB ER-32 Collet Chuck-Drawbar End
HHIP 3900-5090#40 NMTB ER-32 Collet Chuck-Drawbar End
By HHIP
In Stock
$91.77
$66.00
You Save: 28%

mpn: 3900-5090, ean: 0769053027791,

4.0 out of 5 stars with 38 reviews
#40 NMTB ER-32 Collet Chuck 5/8''-11 Threaded Drawbar End Made of high grade tool steel. Hardened and precision ground. Meets or exceeds Federal Specifications.5/8''-11 Threaded Drawbar End. Made of high grade tool steel. Hardened and precision ground. Meets or exceeds Federal Specifications.


Cast Aluminum Tightening Fixture for BT40 Tool Holder
Cast Aluminum Tightening Fixture for BT40 Tool Holder
By SFX
In Stock
$39.00

mpn: BT40,

4.5 out of 5 stars with 52 reviews
Cast Aluminum integrated, realize vertical and horizontal fixing. Fits BT40 tool holder The blank is spray painted after polished, exquisite appearance. The dimension of positioning block is accurate. High hardness and wear resistance after heat treatment. Heightening design of positioning block, more stable and reliable. Scientific installation of screw and body, more durable.Cast Aluminum integrated, realize vertical and horizontal fixing. The blank is spray painted after polished, exquisite


ER32 Collet Set By 16th or 32nds
ER32 Collet Set By 16th or 32nds
By tpactools
In Stock
$45.00

mpn: TPACTOOLS,

4.7 out of 5 stars with 59 reviews
ER32 Collet Set By 16th or 32nds12PC Size: 1/8''; 3/16''; 7/32'', 1/4''; 5/16''; 3/8''; 7/16''; 1/2''; 9/16''; 5/8''; 11/16''; 3/4''.. 8PC Size: 1/8''; 1/4''; 3/16; 5/16''; 3/8''; 1/2''; 5/8''; 3/4''.. 25PC Set, 1/8''; 3/16''; 7/32'', 1/4''; 5/16''; 3/8''; 7/16''; 1/2''; 9/16''; 5/8''; 11/16''; 3/4''; 1/16, 3/32, 5/32, 9/32, 11/32, 13/32, 15/32, 17/32, 19/32, 21/32, 23/32, 25/32, 13/19. Metric 20PC Set, 2, 2.5, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20mm. Choose correct


Tapmatic RX 30 Self-Reversing Tapping Head, #33JT Taper Mount, #0 - 1/4'' and M1.4-M7 Capacity
Tapmatic RX 30 Self-Reversing Tapping Head, #33JT Taper Mount, #0 - 1/4" and M1.4-M7 Capacity
By Tapmatic
In Stock
$588.00
$569.00
You Save: 3%

mpn: 013033,

4.6 out of 5 stars with 9 reviews
Newest series for high production with heavy duty ball clutch. Tapping attachments for drilling and milling machines and pneumatic, hydraulic and electric spindles. High production self-reversing tapping attachments with high-speed reverse and pre-selective torque control. For hard to machine material and high torque applications like roll form tapping. Less tap breakage due to pre-selective torque control. Reduced cycle time through increased 1.75:1 reverse speed. Easy handling, compact design.


Kyocera A12SSWUPR3AE Indexable Dynamic Boring Bar
Kyocera A12SSWUPR3AE Indexable Dynamic Boring Bar
By Kyocera
In Stock
$125.43

mpn: A12S-SWUPR3AE,

4.4 out of 5 stars with 40 reviews
Series: Dynamic BarToolholder Style: A...SWUP-EHand of Holder: Right-HandRake: PositiveLead Angle (Degree): 3Minimum Bore Diameter (Decimal Inch): 0.93Minimum Bore Diameter (mm): 23.622Shank Diameter (Decimal Inch): 0.75Shank Diameter (mm): 19.05Shank Flat Width (Decimal Inch): 0.711Shank Flat Width (mm): 18.0594Overall Length (Decimal Inch): 10Overall Length (mm): 254Head Length (Decimal Inch): 1.417Head Length (mm): 35.9918Center to Cutting Edge (Decimal Inch): 0.413Center to Cutting Edge (mm)


DORIAN 73310150128 MCLNR-16-4D RH TOOLHOLDER - 1'' X 6''
DORIAN 73310150128 MCLNR-16-4D RH TOOLHOLDER - 1'' X 6''
By Dorian Tool
In Stock
$61.00

mpn: 55K-T71-0010,

4.2 out of 5 stars with 43 reviews
MCLNR-16-4D RH TOOLHOLDER - 1'' X 6''.


Amana Tool TE-110 CNC High Precision Tool Holder Extension 1-21/32 Dia x 1/2 Shank Dia x 1/4 Inner Dia x 6-1/8 Inches Long, Includes CO-286 for Collet ER-25 and Mini Wrench
Amana Tool TE-110 CNC High Precision Tool Holder Extension 1-21/32 Dia x 1/2 Shank Dia x 1/4 Inner Dia x 6-1/8 Inches Long, Includes CO-286 for Collet ER-25 and Mini Wrench
By Amana Tool
In Stock
$74.85

mpn: TE-110, ean: 0738685345061,

4.2 out of 5 stars with 18 reviews
High Precision Spring Collets, Extensions, Adapters Holders and Retaining Studs for CNC Machines are made by Amana Tool, the leading manufacturers of cutting tools. Using Amana Tool TE-110 CNC High Precision Tool Holder Extension 1-21/32 Dia x 1/2 Shank Dia x 1/4 Inner Dia x 6-1/8 Inches Long results in the very best tool performance. SPECIFICATIONS: (D) Diameter: 1-21/32; (d) Shank: 1/2; Overall Length (L): 6-1/8; Collet Standard: ER25; L1: 4; Spring Collet Included: CO-286; D1: 1/4; Included W


SCM 19/1 4095 Size 1 Torque Control Quick Change Tap Adapter 3/8''/M10, Alloy Tool Steel
SCM 19/1 4095 Size 1 Torque Control Quick Change Tap Adapter 3/8"/M10, Alloy Tool Steel
By SCM
In Stock
$75.80

mpn: 19/1 4095,

4.9 out of 5 stars with 21 reviews
The SCM Torque Control Quick Change Tap Adapter is made in Italy, made with very high standards of quality. It is sure to deliver premium concentricity in tapping and long-term repeatability. SCM offers the Torque Control tap adapter as the best solution for protecting your taps and work pieces from tap breakage, especially in blind hole applications where chip evacuation is a concern.Torque control adapters are the best solution for protecting your taps and work pieces from tap breakage. The pr


SCM 19/1 4041 Size 1 Torque Control Quick Change Tap Adapter #8/M4, Alloy Tool Steel
SCM 19/1 4041 Size 1 Torque Control Quick Change Tap Adapter #8/M4, Alloy Tool Steel
By SCM
In Stock
$54.23
$52.84
You Save: 3%

mpn: 19/1 4041,

4.1 out of 5 stars with 19 reviews
The SCM Torque Control Quick Change Tap Adapter is made in Italy, made with very high standards of quality. It is sure to deliver premium concentricity in tapping and long-term repeatability. SCM offers the Torque Control tap adapter as the best solution for protecting your taps and work pieces from tap breakage, especially in blind hole applications where chip evacuation is a concern.Torque control adapters are the best solution for protecting your taps and work pieces from tap breakage. The pr


Lyndex 830-024 R8 Taper Shank Steel End Mill Holder, 1'' Nose Diameter, 3/8'' Hole Diameter
Lyndex 830-024 R8 Taper Shank Steel End Mill Holder, 1" Nose Diameter, 3/8" Hole Diameter
By Lyndex-Nikken
In Stock
$66.79

mpn: 830-024, ean: 0201302181200,

4.1 out of 5 stars with 14 reviews
Lyndex R8 end mill holder. Through-spindle coolant capability. AT3 or better taper. Set Screws are included. Back-up screws not included. Ideal for milling and tapping. Quick and easy set up. Featuring the highest taper contact and high quality steel, our end mill holders provide extreme rigidity for even the heaviest machining applications. End mill inner bore T.I.R. less than 0.0002. up to 20,000 rpm speed. 1-inches nose diameter, 3/8-inches hole diameter. 1.33-inches length.Through-spindle co


TG#: 12252F Ð Steel Tongue & Groove Soft Jaws for 12'' Chuck - (6.000 L x 2.000 W x 2.500 H) - GrooveWidth: 0.500/TongueWidth: 0.750/Screw: 1/2''/HoleSpace: 2.500/Tongue to Front: 3.670
TG#: 12252F Ð Steel Tongue & Groove Soft Jaws for 12" Chuck - (6.000 L x 2.000 W x 2.500 H) - GrooveWidth: 0.500/TongueWidth: 0.750/Screw: 1/2"/HoleSpace: 2.500/Tongue to Front: 3.670
By Exact Tooling
In Stock
$112.83

mpn: TG-12252F, ean: 0689557268769,

4.1 out of 5 stars with 11 reviews
TG#: 12252F Ð Steel Tongue & Groove Soft Jaws for 12'' Chuck - (6.000 L x 2.000 W x 2.500 H) - GrooveWidth: 0.500 / TongueWidth: 0.750 / Screw: 1/2'' / HoleSpace: 2.500 / Tongue to Front: 3.670.


SCM Global ER16 Collet Chuck with 3/4'' Diameter x 5.73'' Length Straight Shank 2217.16.3/4
SCM Global ER16 Collet Chuck with 3/4" Diameter x 5.73" Length Straight Shank 2217.16.3/4
By Global SCM
In Stock
$90.63
$86.10
You Save: 5%

mpn: 2217.16.3/4,

4.9 out of 5 stars with 14 reviews
SCM Global ER Collet Chucks are precision made in Italy and balanced to 20,000 RPM for a Total Indicator Run-out of 0.0002''. Chuck comes with a certificate of accuracy.Holds ER16 collets for tools 0.019 - 0.394'' in diameter. Measures 0.750'' diameter by 5.730'' length. Total Indicator Run-out 0.0002''.


AXA Piston Type Quick Change Tool Post 250-100 for 6-12'' Lathe New
AXA Piston Type Quick Change Tool Post 250-100 for 6-12" Lathe New
By findmall
In Stock
$49.85

mpn: 202-9465 250-100, ean: 7081781697811,

4.9 out of 5 stars with 39 reviews
Unlimited versatility No tool post indexing necessary No need to disturb basic setup This tool post comes with a blank T-slot nut plate. Customers will need to machine the plate to fit their own specific t-slot for their lathe. Package includes: As the picture shows  Quick Changing Tool Post Piston Type 100 AXA. Lathe Swing: 6-12''. Only takes a second to change tools. Rugged construction eliminates chatter and vibration. No time wasted with shims.


Lyndex 830-064 R8 Taper Shank Steel End Mill Holder, 2.36'' Nose Diameter, 1'' Hole Diameter
Lyndex 830-064 R8 Taper Shank Steel End Mill Holder, 2.36" Nose Diameter, 1" Hole Diameter
By Lyndex-Nikken
In Stock
$90.96
$78.45
You Save: 14%

mpn: 830-064, ean: 0201302181507,

4.3 out of 5 stars with 22 reviews
Lyndex R8 end mill holder. Through-spindle coolant capability. AT3 or better taper. Set Screws are included. Back-up screws not included. Ideal for milling and tapping. Quick and easy set up. Featuring the highest taper contact and high quality steel, our end mill holders provide extreme rigidity for even the heaviest machining applications. End mill inner bore T.I.R. less than 0.0002. up to 20,000 rpm speed. 2.36-inches nose diameter, 1-inches hole diameter. 3.25-inches length.Through-spindle c


RedLine Tools RER32W - Live Tool Accessory - External Nut - Axial and Radial Collet Wrench
RedLine Tools RER32W - Live Tool Accessory - External Nut - Axial and Radial Collet Wrench
By RedLine Tools
In Stock
$25.75

mpn: RER32W,

4.8 out of 5 stars with 14 reviews
Live Tool Accessory - External Nut - Axial and Radial Collet Wrench.


Pro Series by HHIP 3901-4255 3/4 x Cat 40 V-Flange Shell End Mill Arbor
Pro Series by HHIP 3901-4255 3/4 x Cat 40 V-Flange Shell End Mill Arbor
By HHIP
In Stock
$114.25

mpn: 3901-4255, ean: 0769053080345,

4.5 out of 5 stars with 60 reviews
Pro-Series 3/4'' X CAT 40 V-Flange Shell End Mill Arbor ~ for CNC machines with CAT 40 taper spindles. ~ Made of 20CrMnTi alloy steel. ~ Electrolysis nickel coating. ~ Balanced to 8,000 RPM. ~ Tolerance is .0002'' maximum. ~ Material is 42 CrMo. ~ Hardness is HRC 50~52. ~ Thread tolerance class is 4H. ~ Retention knob thread is 5/8-11.Mor CNC machines with CAT 40 taper spindles. Made of 20CrMnTi alloy steel. Electrolysis nickel coating. Balanced to 8,000 RPM. Tolerance is .0002'' maximum. Materi


8 Pcs Trephine Drills Kit with Bur Holder
8 Pcs Trephine Drills Kit with Bur Holder
By PRO IRON GEAR
In Stock
$99.99

mpn: 4009, ean: 9878678691773,

4.5 out of 5 stars with 54 reviews
8pcs Trephine Drills High Quality Stainless Steel, with Depth Markings & a FREE Stand / Holder. Trephine Sizes: (1mm Wall) - 3.0mm - 4.0mm - 5.0mm - 6.0mm - 7.0mm - 8.0mm - 9.0mm - 10.0mm Marking Depths on the Trephine for accurate drilling, sizes 2.0mm, 4.0mm, 6.0mm, 8.0mm & 10.0mm.3.0mm - 4.0mm - 5.0mm - 6.0mm - 7.0mm - 8.0mm - 9.0mm - 10.0mm.



Viewing Page 3 of 6

View more products in Abrasive Accessories.
Feel free to Browse Our Catalog.



Privacy Policy / Terms of Service / Accessibility Statement
© 2019 - groupmpublications.com. All Rights Reserved.