Spiral Power Brushes - Huge Savings! Save up to 13%


Huge Savings! Up to 13% off on Spiral Power Brushes at Group Publications. Top brands include Weiler, John R. Robinson INC., ARBrend, Everbilt, Forney, TOUGH GUY, & Brush Research. Hurry! Limited time offers. Offers valid only while supplies last.



Weiler Trulock Narrow Face Wire Wheel Brush, Round Hole, Steel, Crimped Wire, 6'' Diameter, 0.014'' Wire Diameter, 5/8-1/2'' Arbor, 1-7/16'' Bristle Length, 3/4'' Brush Face Width, 6000 rpm
Weiler Trulock Narrow Face Wire Wheel Brush, Round Hole, Steel, Crimped Wire, 6" Diameter, 0.014" Wire Diameter, 5/8-1/2" Arbor, 1-7/16" Bristle Length, 3/4" Brush Face Width, 6000 rpm
By Weiler
In Stock
$14.13

mpn: Weiler 01075, ean: 0640024980096,

4.1 out of 5 stars with 49 reviews
These wheels are highly flexible and are ideal for light to medium duty surface preparation on irregular surfaces. Weiler's solid ring construction ensures smooth brushing action and long brush life. Our crimped wire wheels are densely filled with high quality fill materials including heat-treated steel, Type 302 stainless steel, brass, or bronze wire.Flexible brushing action. Applicable for cleaning rust, scale and dirt. Also used for light deburring, edge blending, roughening for adhesion, fin


Flared Crimped Wire End Wire Brush, Stainlesss
Flared Crimped Wire End Wire Brush, Stainlesss
By Weiler
In Stock
$16.45

mpn: 10047, ean: 0012382100476,

4.8 out of 5 stars with 60 reviews
Crimped Wire End Brush, Brush Dia. 1-1/2 In. , Fill Material Stainless Steel, Max. RPM 10, 000, Wire Dia. 0. 022 In. , Overall Length 3 In. , Shank Size 1/4 In. , Trim Length 7/8 In.Power Tools and Accessories. Country of manufacture: United States. Manufacturer: Weiler.


Weiler 21104 Hand Tube Brush, Single Stem/Single Spiral, 1/2'', 0.04'' Stainless Steel Wire Fill, 2'' Length (Pack of 10)
Weiler 21104 Hand Tube Brush, Single Stem/Single Spiral, 1/2", 0.04" Stainless Steel Wire Fill, 2" Length (Pack of 10)
By Weiler
In Stock
$26.21
$25.65
You Save: 2%

mpn: 21104, ean: 0012382211042,

4.6 out of 5 stars with 33 reviews
Weiler offers a comprehensives line of hand tube brushes for internal cleaning and deburring applications in tubing, pipe, drilled-and-tapped holes, and machined bores and passages. Due to their twisted-in-wire construction, the use of power tubes is limited to low-speed power tools such as drills and drill presses and to CNC and manual machine tools in which the RPM can be precisely programmed or set. Single stem, single spiral tube brushes feature a single continuous length of galvanized steel


Nylon Brushes Dia, 5/8'' for Tube Cleaning Flexible Shafts. (Pack of 25)
Nylon Brushes Dia, 5/8" for Tube Cleaning Flexible Shafts. (Pack of 25)
By John R. Robinson INC.
In Stock
$58.99

mpn: JRRB211N.58,

4.7 out of 5 stars with 54 reviews
Recommended for removing soft deposits such as mud, silt, and algae in straight, non-ferrous tubes (Copper, Brass, Plastic, etc.). Brush should be equal to or 1/16'' smaller than the tube ID. Available in blue and black upon availability. Other colors upon requestEliminate's mud,slit, and algae in your tubes. 1/4'' - 28 Male thread. Check thread size compared to shafts when ordering.. Designed for cleaning enhanced tubes in heat exchangers and tubes in surface condensers..


Mill-Rose 8300 Single Spiral Flue And Boiler Tube Brush, 2''
Mill-Rose 8300 Single Spiral Flue And Boiler Tube Brush, 2"
By ARBrend
In Stock
$17.42
4.9 out of 5 stars with 44 reviews
.


Weiler 6-1/2'' Length, 1-1/8'' Diameter, 1'' Brush Length, Copper Tube Internal Fitting Wire Brush
Weiler 6-1/2" Length, 1-1/8" Diameter, 1" Brush Length, Copper Tube Internal Fitting Wire Brush
By Weiler
In Stock
$10.00

mpn: Weiler 44085, ean: 0012382440855,

4.7 out of 5 stars with 28 reviews
Several configurations and sizes of tube fitting brushes are available for cleaning and deburring copper, internal and external tube fittings. The handy 4-in-1 tube fitting brush cleans both outside and inside diameters of multiple tube sizes.For internal cleaning and deburring of copper tube fittings; also used in trucking and marine industries as a light socket cleaning brush. 1'' Tube diameter. 3-1/4'' Handle length.


Weiler Dualife Narrow Face Wire Wheel Brush, Threaded Hole, Steel, Stringer Knotted, 6'' Diameter, 0.020'' Wire Diameter, 5/8-11'' Arbor, 1-1/8'' Bristle Length, 3/16'' Brush Face Width, 12500 rpm
Weiler Dualife Narrow Face Wire Wheel Brush, Threaded Hole, Steel, Stringer Knotted, 6" Diameter, 0.020" Wire Diameter, 5/8-11" Arbor, 1-1/8" Bristle Length, 3/16" Brush Face Width, 12500 rpm
By Weiler
In Stock
$19.99
$17.44
You Save: 13%

mpn: Weiler 09400, ean: 0636123604032,

4.5 out of 5 stars with 51 reviews
The individual knot wire tufts of a knot wheel provide minimal flexibility for more aggressive brushing action. Weiler's knot wheels are constructed with an internal steel plate that has equally spaced individual holes around the perimeter. Wire is inserted through each hole and twisted into a knot. Each hole has precisely the same wire count, thereby assuring perfect balance. This eliminates vibration, reduces operator fatigue and increases brush life. Knot wire wheels are available in


Weiler 13131 ROUGHNECK MAX 4'' Stringer Bead Wire Wheel, .020'' Steel Fill, 5/8''-11 UNC Nut, Made in USA, Pack of 5
Weiler 13131 ROUGHNECK MAX 4" Stringer Bead Wire Wheel, .020" Steel Fill, 5/8"-11 UNC Nut, Made in USA, Pack of 5
By Weiler
In Stock
$57.15

mpn: 30012382131310,

4.9 out of 5 stars with 9 reviews
Roughneck Max Stringer bead wheels deliver unmatched weld cleaning performance By maximizing life, efficiency and consistency. The 4'''' Brushes are recommended for cleaning root pass welds, surface prep and other cleaning applications. Roughneck Max wheels have been re-engineered to maximize life, efficiency and consistency. Our premium weld cleaning brushes are manufactured to the most stringent quality standards, utilizing the highest quality wire available. The twist puts all the sharp tips


Weiler Wire Cup Brush, Threaded Hole, Steel, Crimped Wire, 3-1/2'' Diameter, 0.014'' Wire Diameter, 10x1.50 mm Arbor, 7/8'' Bristle Length, 12000 rpm (Pack of 1)
Weiler Wire Cup Brush, Threaded Hole, Steel, Crimped Wire, 3-1/2" Diameter, 0.014" Wire Diameter, 10x1.50 mm Arbor, 7/8" Bristle Length, 12000 rpm (Pack of 1)
By Weiler
In Stock
$12.95

mpn: Weiler 13176, ean: 0012382131760,

4.1 out of 5 stars with 45 reviews
For use on large, flat surface areas, Weiler cup brushes provide fast, heavy-duty brushing action. Designed for use on production equipment, angle grinders, and portable power tools, our cup brushes are available in a wide variety of diameters and wire filament, including heat-treated steel, type 302 stainless steel, bronze and brass.For light to medium duty, general purpose cleaning of large surfaces. Applicable for roughening, deburring, rust and paint removal; heavy-duty cleaning of large


Drill Powered Duct Brush Kit
Drill Powered Duct Brush Kit
By Everbilt
In Stock
$18.27

mpn: PCPBHD, ean: 0060672310364,

4.4 out of 5 stars with 59 reviews
The Drill Powered Duct Brush helps to remove lint build up and debris in your dryer duct as well as other general ducting. This brush can be used manually or attached to a drill for increased power. The brush kit includes a 4 in. of diameter brush head and 4 2 ft. flexible rods that can be used to extend the brush up to 8 ft. in length.Suitable for typical clothes dryer duct runsFlexible nylon rods allow for up to 90° turnsUsed to clean lint and debris from the dryer duct by access through


Weiler Round Power Tube Brush, Stainless Steel 302, Round Shank, Double Stem, 1'' Diameter, 0.008'' Wire Diameter, 1/4'' Shank, 2000 rpm (Pack of 1)
Weiler Round Power Tube Brush, Stainless Steel 302, Round Shank, Double Stem, 1" Diameter, 0.008" Wire Diameter, 1/4" Shank, 2000 rpm (Pack of 1)
By Weiler
In Stock
$61.88

mpn: Weiler 21087,

4.5 out of 5 stars with 25 reviews
Also known as internal brushes, weiler's comprehensive line of power and hand tube brushes provide fast, efficient cleaning and finishing of hard-to-reach areas such as internal diameters, crevices, threaded surfaces and other difficult-to-access areas. Brushes are available in many configurations and fill materials, such as steel, type 302 stainless steel, brass, horsehair, nylon and tampico.Use fully chucked on smooth or threaded blind holes. A round tube brush is most effectively used fully c


Forney 72803.0 72803.0 End Brush Crimped
Forney 72803.0 72803.0 End Brush Crimped
By Forney
In Stock
$18.70

mpn: 72803.0, ean: 0032277728035,

4.7 out of 5 stars with 8 reviews
1'' stainless steel crimped wire end brush. Ideal for a variety of general uses including surface blending, cleaning and polishing. Suitable for use on CNC equipment or with any 1/4'' diameter Electric or air tool cordless drill or 1990 pneumatic (air) drill.Diameter: 1''. Shank: 1/4''. Hex wire size: .012'' (.304 mm). For use on white metals.


Spin Grit Brushes Dia, 5/8'' for Tube Cleaning Flexible Shafts. (Pack of 10)
Spin Grit Brushes Dia, 5/8" for Tube Cleaning Flexible Shafts. (Pack of 10)
By John R. Robinson INC.
In Stock
$65.00

mpn: JRRBSG6.25,

4.9 out of 5 stars with 43 reviews
Recommended for removing soft and light scale deposits in straight, ferrous and non-ferrous tubes. This brush's abrasive impregnated nylon bristles clean and polish tubes in one step. Unlike regular spiral brushes the Spin-Grit brush is designed to be oversized in the tube so the bristles lay over, putting the brush in contact with the tube wallEliminate's mud,slit, and algae in your tubes. 1/4'' - 28 Male thread. Check thread size compared to shafts when ordering.. Designed for cleaning enhance


Weiler Power Tube Brush, Steel, Round Shank, Double Stem, Double Spiral, 1/2'' Diameter, 0.0104'' Wire Diameter, 5/32'' Shank, 2000 rpm (Pack of 1)
Weiler Power Tube Brush, Steel, Round Shank, Double Stem, Double Spiral, 1/2" Diameter, 0.0104" Wire Diameter, 5/32" Shank, 2000 rpm (Pack of 1)
By Weiler
In Stock
$93.10
$88.23
You Save: 5%

mpn: Weiler 21252, ean: 0012382212520,

4.2 out of 5 stars with 60 reviews
1/2'' Power Tube Brush, .0104, 2'' B.L. (DS-1/2)Use fully chucked on smooth or threaded blind holesUse with power tools for heavy-duty cleaning and deburring. Applicable for deburring and cleaning drilled holes and internal threads; cleaning and finishing internal diameters of pipes and tubes. Also used for deburring and cleaning internal keyways and grooves, carbon removal, crosshole deburring.


Single Spiral Tube Wire Brush, 0.090'', PK10
Single Spiral Tube Wire Brush, 0.090", PK10
By Weiler
In Stock
$68.56

mpn: 98601,

4.9 out of 5 stars with 23 reviews
'Single Spiral Tube Brush, Operation Type - Spiral and Tube Brush Power, Spiral Brush, Shank Style - Abrasive Brushes Single, Brush Dia. 0.090 In., Brush Length 3/4 In., Overall Length 4 In., Wire Dia. 0.008 In., Shank Size 0.041 In., Fill Material Aluminum Oxide, Max. RPM 1500, Package Quantity 10'Price For: Each.


Tube Brush,OAL 6 1/2 In
Tube Brush,OAL 6 1/2 In
By TOUGH GUY
In Stock
$68.70
4.0 out of 5 stars with 11 reviews
Specification: Item: Tube BrushType: Single Spiral/Double StemFill Type: BrassBrush Length (In.): 4-1/2Brush Dia. (In.): 1-1/2Handle Type: 1/4'' (M) NPSOverall Length (In.): 7-1/2For Use With: Fiberglass or Metal HandlesPackage Quantity: 1''Item: Tube Brush. Type: Single Spiral/Double Stem. Fill Type: Brass. Brush Length (In.): 4-1/2. Brush Dia. (In.): 1-1/2.


Tube Brush,Dia 3,1/4 MNPT,Length 8
Tube Brush,Dia 3,1/4 MNPT,Length 8
By TOUGH GUY
In Stock
$66.90
4.9 out of 5 stars with 55 reviews
Specification: Item: Tube BrushType: Single Spiral/Double StemFill Type: BrassBrush Length (In.): 4-1/2Brush Dia. (In.): 3Handle Type: 1/4'' (M) NPSOverall Length (In.): 7-1/2For Use With: Fiberglass or Metal HandlesPackage Quantity: 1''Item: Tube Brush. Type: Single Spiral/Double Stem. Fill Type: Brass. Brush Length (In.): 4-1/2. Brush Dia. (In.): 3.


Weiler 0.004'' Wire Size, 3/8'' Diameter, 8'' Length, Steel Bristles, Single Stem Single Spiral Hand Tube Brush With Eye Handle
Weiler 0.004" Wire Size, 3/8" Diameter, 8" Length, Steel Bristles, Single Stem Single Spiral Hand Tube Brush With Eye Handle
By Weiler
In Stock
$42.61

mpn: Weiler 21094, ean: 0012382210946,

4.4 out of 5 stars with 55 reviews
Also known as internal brushes, weiler's comprehensive line of power and hand tube brushes provide fast, efficient cleaning and finishing of hard-to-reach areas such as internal diameters, crevices, threaded surfaces and other difficult-to-access areas. Brushes are available in many configurations and fill materials, such as steel, type 302 stainless steel, brass, horsehair, nylon and tampico.Use for manual cleaning applications. Applicable for deburring and cleaning drilled holes and internal


Brush Research 81AMMKIT Stainless Steel Metric Brush Kit (Includes 1 mm, 1.5 mm, 2 mm, 2,5 mm, 3 mm, 3.5 mm, 4 mm, 4,5 mm, 5 mm, 5.5 mm, 6 mm and 6.5 mm and a Pin Vise)
Brush Research 81AMMKIT Stainless Steel Metric Brush Kit (Includes 1 mm, 1.5 mm, 2 mm, 2,5 mm, 3 mm, 3.5 mm, 4 mm, 4,5 mm, 5 mm, 5.5 mm, 6 mm and 6.5 mm and a Pin Vise)
By Brush Research
In Stock
$44.95

mpn: 81AMMKIT, ean: 7535001619379,

4.0 out of 5 stars with 24 reviews
Brush Research manufacturing Series 81a Kit, ideal for Micro Burr removal, internal cleaning, rust removal and surface preparation. Kits contains 12 brushes. Available for both Decimal and metric hole sizes. The inch Kit includes 1mm, 1.5mm, 2mm, 2,5mm, 3mm, 3.5mm, 4mm, 4,5mm, 5mm, 5.5mm, 6mm and 6.5mm sizes. Also included with this selection is our premium double end pin vise which provides a safe and secure means of using the brush. Double collets on both ends make this an exceptionally versat


Weiler Wire Cup Brush, Threaded Hole, Stainless Steel 302, Crimped Wire, 3-1/2'' Diameter, 0.014'' Wire Diameter, 5/8''-11 Arbor, 7/8'' Bristle Length, 12000 rpm (Pack of 1)
Weiler Wire Cup Brush, Threaded Hole, Stainless Steel 302, Crimped Wire, 3-1/2" Diameter, 0.014" Wire Diameter, 5/8"-11 Arbor, 7/8" Bristle Length, 12000 rpm (Pack of 1)
By Weiler
In Stock
$30.99
$27.19
You Save: 12%

mpn: Weiler 13188, ean: 0012382131883,

4.3 out of 5 stars with 27 reviews
For use on large, flat surface areas, Weiler cup brushes provide fast, heavy-duty brushing action. Designed for use on production equipment, angle grinders, and portable power tools, our cup brushes are available in a wide variety of diameters and wire filament, including heat-treated steel, type 302 stainless steel, bronze and brass.For light to medium duty, general purpose cleaning of large surfaces. Applicable for roughening, deburring, rust and paint removal; heavy-duty cleaning of large



Viewing Page 1 of 8

View more products in Power Brushes.
Feel free to Browse Our Catalog.



Privacy Policy / Terms of Service / Accessibility Statement
© 2019 - groupmpublications.com. All Rights Reserved.