Grinding Cones & Plugs - Page 2 - Blowout Sale! Save up to 55%


Blowout Sale! Up to 55% off on Grinding Cones & Plugs at Group Publications, Page 2. Top brands include 3M, Pferd, Unknown, United Abrasives- SAIT, Hanchen, Pro Tec Air Systems, Norton Abrasives - St. Gobain, & OKBY. Hurry! Limited time offers. Offers valid only while supplies last.



3M Cloth Cone 777F, 2 in x 1-1/2 in x 1-1/4 in 80 YF-Weight, 50 per Inner 200 per case
3M Cloth Cone 777F, 2 in x 1-1/2 in x 1-1/4 in 80 YF-Weight, 50 per Inner 200 per case
By 3M
In Stock
$657.86

mpn: 83451-case,

4.8 out of 5 stars with 17 reviews
3M Cloth Cone 777F reaches into corners, inside surfaces and tight spaces to refine welds, remove machine tool marks, and polish. Built with 3M Ceramic Abrasive Grain on a water resistant polyester cloth backing, it can be run wet or dry. A resin bond is heat resistant and a grinding aid helps to run cool, especially on heat sensitive metals like stainless steel and nickel alloys.Ceramic/aluminum oxide blend self-sharpens with use and cuts with exceptional efficiency. Tough YF-weight, polyester


PFERD 46140 Policap Abrasive Cap, Shape L, Silicon Carbide SiC-Cool, 27/32'' Diameter x 1-9/16'' Length, 80 Grit (Pack of 50)
PFERD 46140 Policap Abrasive Cap, Shape L, Silicon Carbide SiC-Cool, 27/32" Diameter x 1-9/16" Length, 80 Grit (Pack of 50)
By Pferd
In Stock
$74.10

mpn: 46140,

4.3 out of 5 stars with 57 reviews
PFERD Policap abrasive cap with tapered radius end shape have a seamless design for smooth operation, and the entire surface of the abrasive cap can be used. The high degree of fitting accuracy between the components ensures that the abrasive caps remain securely attached to the holder during use. Advantages; Because of slots, the holder expands during use, guaranteeing that the abrasive cap is firmly clamped in place; Good dimensional stability and excellent fine grinding thanks to a special ma


MC2000 AUDIO INPUT CARD CAGE
MC2000 AUDIO INPUT CARD CAGE
By Unknown
In Stock
$241.70

mpn: MCAPI2,

4.5 out of 5 stars with 37 reviews
BOGEN MCAPI2 This is a MC2000 AUDIO INPUT CARD CAGE that allows priority override function for audio bus 3 where in each audio bus input has a C-Form contact closure that changes state when the installed module detects audio (VOX) activity.BOGEN MCAPI2 This is a MC2000 AUDIO INPUT CARD CAGE that allows priority override function for audio bus 3 where in each audio bus input has a C-Form contact closure that changes state when the installed module detects audio (VOX) activity..


United Abrasives-SAIT 25205 2 by 3 by 3/8-24 A16 Type 18 Plug, 10-Pack
United Abrasives-SAIT 25205 2 by 3 by 3/8-24 A16 Type 18 Plug, 10-Pack
By United Abrasives- SAIT
In Stock
$98.99

mpn: 25205, ean: 0699053252056,

4.0 out of 5 stars with 21 reviews
SAIT 25205 Type 18 Plug, aluminum oxide grain. For grinding and snagging in hard to reach areas. Fast stock removal. For use on ferrous metal.Aluminum oxide grain. Fast stock removal. For grinding and snagging in hard to reach areas. Made in the U.S.A..


Hanchen Zirconia Grinding Balls Media Beads 250g Yttrium Stabilized Zirconium Oxide Grinding Balls (80% ZrO2, Other Optional (0.05~60mm))
Hanchen Zirconia Grinding Balls Media Beads 250g Yttrium Stabilized Zirconium Oxide Grinding Balls (80% ZrO2, Other Optional (0.05~60mm))
By Hanchen
In Stock
$999.00

mpn: MX-157c,

4.3 out of 5 stars with 44 reviews
Hanchen Description Zirconia beads have a pearly luster and a smooth spherical surface. Using micron-sized and sub-nanometer zirconia powder as raw materials, cerium oxide or cerium oxide as a stabilizer is the best in grinding media. It has extremely high strength and high toughness at normal temperature, good wear resistance, high temperature and corrosion resistance, high rigidity, non-magnetic permeability and electrical insulation. Features: Highly polished Yttrium stabilized zirconium


3M 44538 Silver Depressed Center Grinding Wheel, 4-1/2'' x 1/4'' x 7/8'' T27, Ceramic Grain, Lot of 10
3M 44538 Silver Depressed Center Grinding Wheel, 4-1/2" x 1/4" x 7/8" T27, Ceramic Grain, Lot of 10
By 3M
In Stock
$61.00

mpn: 60440317653,

4.1 out of 5 stars with 41 reviews
Designed for heavy grinding, beveling and weld removal. May be used on a variety of substrates such as carbon steel and stainless steel. 3M Precision-Shaped Grain cuts exceptionally fast, helping increase productivity. Exceptional durability extends the life of the wheel for great performance value., Lot of 10.


Polishing Media Green Wedge 1 in Rock Jewelry Vibrating 10 Pounds
Polishing Media Green Wedge 1 in Rock Jewelry Vibrating 10 Pounds
By Pro Tec Air Systems
In Stock
$69.99

mpn: GreenMedia10lbs, ean: 0748926675666,

4.2 out of 5 stars with 21 reviews
Green molded plastic media for tumbling or vibrating. Preplate finish. Lightweight media that produces a very smooth finish. Wedge shape is 1'' x 3/4''. Wedge is uniquely designed media that eliminates many lodging problem, while its configuration will reach hard to finish corners, slots and angles. Greater volume per lb yielding an economical working mass. less weight per cu. ft. reduces surface hammering. Light and clean cutting eliminates abrasive impregnation. Worn particles are easily


Norton 66252820216 6X3/4X1/2 32A100-K8VBE Grinding Wheel
Norton 66252820216 6X3/4X1/2 32A100-K8VBE Grinding Wheel
By Norton Abrasives - St. Gobain
In Stock
$38.95

mpn: 66252820216,

4.0 out of 5 stars with 24 reviews
Listed is a NEW, Norton#66252820216 6X3/4X1/2 32A100K8VBE Grinding Wheel Wheel Diameter: 6'' Wheel Thickness: 3/4'' Wheel Hole Size: 1/2'' Grit : 100 Hardness : K As more and more woodturners and knife shapening customers saw our Norton wheel offering, many asked that we start carrying these wheels. They asked, and we listed. We have these top-of-the line wheels in stock and ready to ship.Great wheel for Woodturners and Knife Sharpeners. Sharp monocrystalline aluminum oxide grain-the industry's


PFERD 61932 Type 18R Straight Cone, Aluminum Oxide, 1-1/2'' Diameter x 3'' Length, 5/8-11 Thread, 24192 RPM, 16 Grit
PFERD 61932 Type 18R Straight Cone, Aluminum Oxide, 1-1/2" Diameter x 3" Length, 5/8-11 Thread, 24192 RPM, 16 Grit
By Pferd
In Stock
$11.75

mpn: 61932, ean: 0097758619325,

4.9 out of 5 stars with 58 reviews
PFERD resin bond straight cone is made of regular aluminum oxide in a high-quality retinoid bond. Because of their hardness, these products are noted for their good stock removal rates and high durability. Cone is used for steel, cast steel and cast iron. Application: ¦weld dressing on steel removing excess weld metals. Chamfering in preparation of welding operations. Grinding in hard-to-reach work piece areas. Removing parting lines and imperfections at casting parts. Smoothing rough


PFERD 46009 Policap Seamless Type Abrasive Cone, Aluminum Oxide A, 5/16'' Diameter x 3-3/8'' Length, 150 Grit (Pack of 10)
PFERD 46009 Policap Seamless Type Abrasive Cone, Aluminum Oxide A, 5/16" Diameter x 3-3/8" Length, 150 Grit (Pack of 10)
By Pferd
In Stock
$23.81

mpn: 46009,

4.2 out of 5 stars with 14 reviews
PFERD Policap Abrasive cone can be mounted and removed by turning them slightly to the right. It is easier to replace when the holder is mounted on the tool drive. Abrasive cones achieve their best performance at a recommended cutting speed of 2,000 - 4,000 SFPM. Fine grinding in tool and mould construction. Finishing on turbine blades after repair. Feather edging of radii at transitions after milling frames in aircraft construction. Fine grinding of hard-to-reach areas and bores. Levelling of


PFERD 46010 Policap Seamless Type Abrasive Cone, Aluminum Oxide A, 5/16'' Diameter x 3-3/8'' Length, 280 Grit (Pack of 10)
PFERD 46010 Policap Seamless Type Abrasive Cone, Aluminum Oxide A, 5/16" Diameter x 3-3/8" Length, 280 Grit (Pack of 10)
By Pferd
In Stock
$23.90

mpn: 46010, ean: 0097758460101,

4.4 out of 5 stars with 50 reviews
PFERD Policap Abrasive cone can be mounted and removed by turning them slightly to the right. It is easier to replace when the holder is mounted on the tool drive. Abrasive cones achieve their best performance at a recommended cutting speed of 2,000 - 4,000 SFPM. Fine grinding in tool and mould construction. Finishing on turbine blades after repair. Feather edging of radii at transitions after milling frames in aircraft construction. Fine grinding of hard-to-reach areas and bores. Levelling of


OKBY Diamond Grinding Disc - Trapezoid Diamond Concrete Grinding Disc Pad for Grinder Grit 30(3 Holes 2 Straight Teeth)
OKBY Diamond Grinding Disc - Trapezoid Diamond Concrete Grinding Disc Pad for Grinder Grit 30(3 Holes 2 Straight Teeth)
By OKBY
In Stock
$12.89

mpn: XHZ-184, ean: 0782016113690,

4.4 out of 5 stars with 52 reviews
Description:Diamond Grinding Pad is a grinding tool for non-metallic materials such as stone and porcelain materials, which has high grinding performance, simple manufacturing, low cost, high grinding quality and can be applied to large-scale grinding processing.Features:High quality diamond material, smooth surface. Metal back works great on magnetic plates.Superb craftsmanship, sharp, wearproof, strong and durable.High grinding performance, low noise.Fit for all concrete grinding


United Abrasives-SAIT 25202 1-1/2 by 2-1/2 by 5/8-11 A20 Type 18 Plug, 10-Pack
United Abrasives-SAIT 25202 1-1/2 by 2-1/2 by 5/8-11 A20 Type 18 Plug, 10-Pack
By United Abrasives- SAIT
In Stock
$96.38
$42.94
You Save: 55%

mpn: 25202, ean: 0699053252025,

4.5 out of 5 stars with 37 reviews
SAIT 25202 Type 18 Plug, aluminum oxide grain. For grinding and snagging in hard to reach areas. Fast stock removal. For use on ferrous metal.Aluminum oxide grain. Fast stock removal. For grinding and snagging in hard to reach areas. Made in the U.S.A..


PFERD 61837 Type 16 Round Nose Cone, Aluminum Oxide, 2-3/4'' Diameter x 3-1/2'' Length, 5/8-11 Thread, 13200 RPM, 16 Grit
PFERD 61837 Type 16 Round Nose Cone, Aluminum Oxide, 2-3/4" Diameter x 3-1/2" Length, 5/8-11 Thread, 13200 RPM, 16 Grit
By Pferd
In Stock
$18.89
$11.75
You Save: 38%

mpn: 61837, ean: 0097758618373,

4.2 out of 5 stars with 10 reviews
PFERD resin bond curved cone is made of regular aluminum oxide in a high-quality retinoid bond. Because of their hardness, these products are noted for their good stock removal rates and high durability. Cone is used for steel, cast steel and cast iron. Application: ¦weld dressing on steel removing excess weld metals. Chamfering in preparation of welding operations. Grinding in hard-to-reach work piece areas. Removing parting lines and imperfections at casting parts. Smoothing rough castings. R


Hanchen Stainless Steel Grinding Balls Media Beads 250g Lab Ball Mill Grinding Media for Lab Planetary Ball Mill (10mm, 201)
Hanchen Stainless Steel Grinding Balls Media Beads 250g Lab Ball Mill Grinding Media for Lab Planetary Ball Mill (10mm, 201)
By Hanchen
In Stock
$42.00

mpn: MX-159f,

4.6 out of 5 stars with 35 reviews
Hanchen Description Highly polished stainless steel is wear-resistant and resistant to acid and solvents. Different sizes of grinding balls available: 3mm, 5mm, 8mm, 10mm, 15mm, 20mm etc( 0.5~150mm ). It has extremely high strength and high toughness at normal temperature, good wear resistance, high temperature and corrosion resistance, high rigidity, non-magnetic permeability and electrical insulation.The grinding media balls are extensively applied to in the fields of Paint, Ink, Geology,


PFERD 46052 Policap Abrasive Cap, Shape G, Aluminum Oxide A, 9/32'' Diameter x 1/2'' Length, 280 Grit (Pack of 50)
PFERD 46052 Policap Abrasive Cap, Shape G, Aluminum Oxide A, 9/32" Diameter x 1/2" Length, 280 Grit (Pack of 50)
By Pferd
In Stock
$43.93

mpn: 46052,

4.6 out of 5 stars with 60 reviews
PFERD Policap abrasive cap with cylindrical shape and pointed cone end have a seamless design for smooth operation, and the entire surface of the abrasive cap can be used. The high degree of fitting accuracy between the components ensures that the abrasive caps remain securely attached to the holder during use. Advantages; Because of slots, the holder expands during use, guaranteeing that the abrasive cap is firmly clamped in place; Good dimensional stability and excellent fine grinding thanks


PFERD 46035 Policap Abrasive Cap, Shape A, Aluminum Oxide A, 3/8'' Diameter x 5/8'' Length, 60 Grit (Pack of 50)
PFERD 46035 Policap Abrasive Cap, Shape A, Aluminum Oxide A, 3/8" Diameter x 5/8" Length, 60 Grit (Pack of 50)
By Pferd
In Stock
$50.92
$49.42
You Save: 3%

mpn: 46035,

4.3 out of 5 stars with 35 reviews
PFERD Policap abrasive cap with cylindrical shape have a seamless design for smooth operation, and the entire surface of the abrasive cap can be used. The high degree of fitting accuracy between the components ensures that the abrasive caps remain securely attached to the holder during use. Advantages; Because of slots, the holder expands during use, guaranteeing that the abrasive cap is firmly clamped in place; Good dimensional stability and excellent fine grinding thanks to a special


PFERD 46104 Policap Abrasive Cap, Shape C, Silicon Carbide SiC-Cool, 9/32'' Diameter x 1/2'' Length, 80 Grit (Pack of 50)
PFERD 46104 Policap Abrasive Cap, Shape C, Silicon Carbide SiC-Cool, 9/32" Diameter x 1/2" Length, 80 Grit (Pack of 50)
By Pferd
In Stock
$41.00

mpn: 46104, ean: 0097758461047,

4.7 out of 5 stars with 50 reviews
PFERD Policap abrasive cap with cylindrical shape and radius end have a seamless design for smooth operation, and the entire surface of the abrasive cap can be used. The high degree of fitting accuracy between the components ensures that the abrasive caps remain securely attached to the holder during use. Advantages; Because of slots, the holder expands during use, guaranteeing that the abrasive cap is firmly clamped in place; Good dimensional stability and excellent fine grinding thanks to a


PFERD 46078 Policap Abrasive Cap, Shape G, Aluminum Oxide A, 1/2'' Diameter x 11/16'' Length, 150 Grit (Pack of 50)
PFERD 46078 Policap Abrasive Cap, Shape G, Aluminum Oxide A, 1/2" Diameter x 11/16" Length, 150 Grit (Pack of 50)
By Pferd
In Stock
$60.50
$60.40

mpn: 46078,

4.7 out of 5 stars with 29 reviews
PFERD Policap abrasive cap with cylindrical shape and pointed cone end have a seamless design for smooth operation, and the entire surface of the abrasive cap can be used. The high degree of fitting accuracy between the components ensures that the abrasive caps remain securely attached to the holder during use. Advantages; Because of slots, the holder expands during use, guaranteeing that the abrasive cap is firmly clamped in place; Good dimensional stability and excellent fine grinding thanks


PFERD 46070 Policap Abrasive Cap, Shape A, Aluminum Oxide A, 5/8'' Diameter x 1'' Length, 280 Grit (Pack of 50)
PFERD 46070 Policap Abrasive Cap, Shape A, Aluminum Oxide A, 5/8" Diameter x 1" Length, 280 Grit (Pack of 50)
By Pferd
In Stock
$60.32
$59.96

mpn: 46070,

4.9 out of 5 stars with 57 reviews
PFERD Policap abrasive cap with cylindrical shape have a seamless design for smooth operation, and the entire surface of the abrasive cap can be used. The high degree of fitting accuracy between the components ensures that the abrasive caps remain securely attached to the holder during use. Advantages; Because of slots, the holder expands during use, guaranteeing that the abrasive cap is firmly clamped in place; Good dimensional stability and excellent fine grinding thanks to a special



Viewing Page 2 of 5

View more products in Abrasive Mounted Points.
Feel free to Browse Our Catalog.



Privacy Policy / Terms of Service / Accessibility Statement
© 2019 - groupmpublications.com. All Rights Reserved.