Buffing & Polishing Mounted Points - Page 4 - On Sale Now! Save up to 2%


On Sale! Up to 2% off on Buffing & Polishing Mounted Points at Group Publications, Page 4. Top brands include Dedeco, Pferd, Standard Abrasives, Cubitron, 3M Finesse-it, & Silver Seal. Hurry! Limited time offers. Offers valid only while supplies last.



Dedeco Sunburst - 3/32'' (2.35 mm) Shank Points, Shape 12 - Precision Thermoplastic Rotary Cleaning, Deburring, and Polishing Tool, Medium 120 Grit (12 Pack)
Dedeco Sunburst - 3/32" (2.35 mm) Shank Points, Shape 12 - Precision Thermoplastic Rotary Cleaning, Deburring, and Polishing Tool, Medium 120 Grit (12 Pack)
By Dedeco
In Stock
$35.95

mpn: 1403, ean: 0792818314034,

4.4 out of 5 stars with 52 reviews
Dedeco Sunburst - 3/32'' (2.35 mm) Shank Points, Shape 12 - Precision Thermoplastic Rotary Cleaning, Deburring, and Polishing Tool, Medium 120 Grit (12 Pack)PRECISION - Sunburst Points are the ''absolute best'' for finishing & polishing hard-to-access areas without removing detail or causing flat spots.. LONG-LASTING - Uniformly blended abrasive-filled points guarantee extended wear life and a consistent, uniform finish. Work faster and lasts longer than conventional point rubber polishers..


PFERD 48744 Cloth Ring, FL Flannel Type, 8'' Diameter, 3/4'' Centre Hole, 3000 Max RPM (Pack of 5)
PFERD 48744 Cloth Ring, FL Flannel Type, 8" Diameter, 3/4" Centre Hole, 3000 Max RPM (Pack of 5)
By Pferd
In Stock
$160.84
$158.83
You Save: 1%

mpn: 48744,

4.8 out of 5 stars with 43 reviews
PFERD Cloth ring is used with polishing pastes for pre polishing and high-gloss polishing tasks. For very smooth finishes it may be recommended to use several, or even all, types in succession. Recommended for high-gloss polishing of all metals with pink polishing paste and plastics with beige polishing paste. Specification: FL Flannel Type; 8'' Diameter; 3/4'' Centre Hole Diameter; 3/8'' Face Width; 950 Recommended Speed RPM; 3000 Max. RPM.Cloth ring is used with polishing pastes for


PFERD 48713 Cloth Ring, ST Sisal Fabric Type, 6'' Diameter, 3/4'' Centre Hole, 4000 Max RPM (Pack of 5)
PFERD 48713 Cloth Ring, ST Sisal Fabric Type, 6" Diameter, 3/4" Centre Hole, 4000 Max RPM (Pack of 5)
By Pferd
In Stock
$123.95

mpn: 48713,

4.3 out of 5 stars with 15 reviews
PFERD Cloth ring is used with polishing pastes for pre polishing and high-gloss polishing tasks. For very smooth finishes it may be recommended to use several, or even all, types in succession. Recommended for pre-polishing of aluminum and brass with grey polishing paste, and non-ferrous metals with brown polishing paste. Specification: ST Sisal Fabric Type; 6'' Diameter; 3/4'' Centre Hole Diameter; 1'' Face Width; 1250 Recommended Speed RPM; 4000 Max. RPM.Cloth ring is used with polishing


PFERD 48723 Cloth Ring, TH Hard Cloth Type, 6'' Diameter, 3/4'' Centre Hole, 4000 Max RPM (Pack of 5)
PFERD 48723 Cloth Ring, TH Hard Cloth Type, 6" Diameter, 3/4" Centre Hole, 4000 Max RPM (Pack of 5)
By Pferd
In Stock
$115.58
$114.43

mpn: 48723,

4.2 out of 5 stars with 7 reviews
PFERD Cloth ring is used with polishing pastes for pre polishing and high-gloss polishing tasks. For very smooth finishes it may be recommended to use several, or even all, types in succession. Recommended for pre-polishing of aluminum and brass with grey polishing paste, and non-ferrous metals with brown polishing paste. Specification: TH Hard Cloth Type; 6'' Diameter; 3/4'' Centre Hole Diameter; 3/8'' Face Width; 1250 Recommended Speed RPM; 4000 Max. RPM.Cloth ring is used with polishing


Standard Abrasives Combi Cross Buff HP 727410, 3 in x 3/4 in x 2 Ply x 1/4-20 VFN 120, 25 per case
Standard Abrasives Combi Cross Buff HP 727410, 3 in x 3/4 in x 2 Ply x 1/4-20 VFN 120, 25 per case
By Standard Abrasives
In Stock
$190.42
$189.53

mpn: 37133-case,

4.7 out of 5 stars with 42 reviews
Our Standard Abrasives Combi Cross Buff HP is uniquely designed with a combination of 2-ply coated abrasive material and stiff, durable Standard Abrasives HP Buff and Blend material to deburr, clean and finish all at the same time. The Combi Cross Buff HP fits inside hard-to-reach areas like the internal diameters of pipes and tubing to produce thorough results.Combination of stiff non-woven and coated abrasive materials is efficient for medium-duty stock removal and finishing in one step. Very


Standard Abrasives Combi Cross Buff GP 727408, 3 in x 3/4 in x 2 Ply x 1/4-20 MED 60, 25 per case
Standard Abrasives Combi Cross Buff GP 727408, 3 in x 3/4 in x 2 Ply x 1/4-20 MED 60, 25 per case
By Standard Abrasives
In Stock
$190.10
$185.79
You Save: 2%

mpn: 37131-case,

4.4 out of 5 stars with 20 reviews
Our Standard Abrasives Combi Cross Buff GP is uniquely designed with a combination of 2-ply coated abrasive material and maroon Standard Abrasives Buff and Blend material to deburr, clean and finish all at the same time. The flexible Combi Cross Buff fits inside hard-to-reach areas like the internal diameters of pipes and tubing to produce thorough results.Combination of non-woven and coated abrasive materials is efficient for stock removal and finishing in one step. Medium (MED) grade abrasive


3M(TM) Rubber Slotted Expander Wheel 28718, Slotted Drum, 5'' Diameter, 1'' Center Hole Diameter, 3500 rpm, Black (Pack of 1)
3M(TM) Rubber Slotted Expander Wheel 28718, Slotted Drum, 5" Diameter, 1" Center Hole Diameter, 3500 rpm, Black (Pack of 1)
By Cubitron
In Stock
$154.01

mpn: 051141287188, ean: 0051141287188,

4.5 out of 5 stars with 49 reviews
3M(TM) Slotted rubber drum expands with centrifugal force to keep abrasive belts tight while grinding. Use with inline sanders (PN28338 and PN28339) for generating straight line scratches for finishing stainless steel and other metals. Expander wheel has 1/4-inches radius to eliminate edge cuts and a 1-inches arbor hole. For use with 3-1/2-inches by 15-1/2-inches 3M(TM) coated abrasive belts and 3M(TM) Surface conditioning belts. Requires #3 wheel adaptor kit (PN45038) to mount to 3M(TM) inline


Dedeco 0169 Rubberized Abrasive Wheel, Silicon Carbide, Fine, 6'' x 1/2'' x 1/2'', Red
Dedeco 0169 Rubberized Abrasive Wheel, Silicon Carbide, Fine, 6" x 1/2" x 1/2", Red
By Dedeco
In Stock
$57.95

mpn: 169, ean: 0792818301690,

4.9 out of 5 stars with 32 reviews
Rubberized Abrasive Wheel 6'' x 1/2'' x 1/2'' - Red, Fine, Silicon Carbide.Ideal for removing rust, heat marks, tarnish, excess solder, scratches, corrosion, blending in and polishing welded seams after rough grinding, polishing bearing surfaces and raceways. For smoothing and polishing castings and punched or sheared pieces, wet sanding of gem stones, trimming plastic articles, smoothing glass edges. Fine, 180 Grit, Silicon Carbide. Cleaning before welding or soldering and for other deburring,


Dedeco 12152 Carbide Bur, Double-Cut, Cylindrical Flat End, 1/4'' x 1'' x 1'', SA-9
Dedeco 12152 Carbide Bur, Double-Cut, Cylindrical Flat End, 1/4" x 1" x 1", SA-9
By Dedeco
In Stock
$61.75

mpn: 12152, ean: 7928183121523,

4.5 out of 5 stars with 41 reviews
Carbide Bur D/C Cylindrical-Flat 1/4'' X 1'' X 1'' (SA-9).1/4'' Shank Diameter. Cylindrical Shape with Flat End. SA-9 D/C Bur.


Dedeco 12726 Carbide Bur, Double-Cut, Tree-Pointed End, 1/4'' x 1/2'' x 1'', SG-5
Dedeco 12726 Carbide Bur, Double-Cut, Tree-Pointed End, 1/4" x 1/2" x 1", SG-5
By Dedeco
In Stock
$16.75

mpn: 12726, ean: 7928183127266,

4.8 out of 5 stars with 28 reviews
Carbide Bur D/C Tree-PT 1/4'' X 1/2'' X 1'' (SG-5).1/4'' Shank Diameter. Tree Shape with Pointed End. SG-5 D/C Bur.


Dedeco 13013 Carbide Bur, Single-Cut, 60 degree Cone, 1/4'' x 1'' x 15/16'', SJ-9
Dedeco 13013 Carbide Bur, Single-Cut, 60 degree Cone, 1/4" x 1" x 15/16", SJ-9
By Dedeco
In Stock
$36.25

mpn: 13013, ean: 7928183130136,

4.4 out of 5 stars with 37 reviews
Carbide Bur S/C 60 degree Cone 1/4'' X 1'' X 15/16'' (SJ-9).1/4'' Shank Diameter. 60 Degree Cone Shape. SJ-9 S/C Bur.


Dedeco 13110 Carbide Bur, Double-Cut, 90 Degree Cone, 1/4'' x 5/8'' x 5/16'', SK-6
Dedeco 13110 Carbide Bur, Double-Cut, 90 Degree Cone, 1/4" x 5/8" x 5/16", SK-6
By Dedeco
In Stock
$18.75

mpn: 13110, ean: 7928183131102,

4.4 out of 5 stars with 36 reviews
Carbide Bur D/C 90 degree Cone 1/4'' X 5/8'' X 5/16'' (SK-6).1/4'' Shank Diameter. 90 Degree Cone Shape. SK-6 D/C Bur.


Dedeco 13114 Carbide Bur, Double-Cut, 90 Degree Cone, 1/4'' x 1'' x 1/2'', SK-9
Dedeco 13114 Carbide Bur, Double-Cut, 90 Degree Cone, 1/4" x 1" x 1/2", SK-9
By Dedeco
In Stock
$34.75

mpn: 13114, ean: 7928183131140,

4.6 out of 5 stars with 10 reviews
Carbide Bur D/C 90 degree Cone 1/4'' X 1'' X 1/2'' (SK-9).1/4'' Shank Diameter. 90 Degree Cone Shape. SK-9 D/C Bur.


3M Finesse-it Buffing Pad 28401, 5-1/4 in White Open Cell Foam, 10 per Inner
3M Finesse-it Buffing Pad 28401, 5-1/4 in White Open Cell Foam, 10 per Inner
By 3M Finesse-it
In Stock
$87.38

mpn: 28401,

4.9 out of 5 stars with 21 reviews
We manufacture the 3M Finesse-it Buffing Pad - White Open Cell Foam to provide the most aggressive finishing action in the 3M Finesse-it foam pad line and is designed to be used with coarser polishes, such as Finesse-it Finishing Material Easy Clean-Up, to effectively remove sanding scratches. It is ideal for polishing automotive OEM, marine, and aerospace coatings.Coarse, open cell foam provides aggressive cut. Waffle face provides sufficient contact surface and minimizes heat buildup. Harder


Standard Abrasives Combi Cross Buff HP 727406, 2 in x 1/2 in x 2 Ply x 8-32 VFN 120
Standard Abrasives Combi Cross Buff HP 727406, 2 in x 1/2 in x 2 Ply x 8-32 VFN 120
By Standard Abrasives
In Stock
$150.28

mpn: 37129,

4.8 out of 5 stars with 22 reviews
Our Standard Abrasives™ Combi Cross Buff HP is uniquely designed with a combination of 2-ply coated abrasive material and stiff, durable Standard Abrasives™ HP Buff and Blend material to deburr, clean and finish all at the same time. The Combi Cross Buff HP fits inside hard-to-reach areas like the internal diameters of pipes and tubing to produce thorough results.Combination of stiff non-woven and coated abrasive materials is efficient for medium-duty stock removal and finishing in one step.


Standard Abrasives Combi Cross Buff GP 727405, 2 in x 1/2 in x 2 Ply x 8-32 MED 80
Standard Abrasives Combi Cross Buff GP 727405, 2 in x 1/2 in x 2 Ply x 8-32 MED 80
By Standard Abrasives
In Stock
$149.22

mpn: 37128,

4.8 out of 5 stars with 16 reviews
Our Standard Abrasives Combi Cross Buff GP is uniquely designed with a combination of 2-ply coated abrasive material and maroon Standard Abrasives Buff and Blend material to deburr, clean and finish all at the same time. The flexible Combi Cross Buff fits inside hard-to-reach areas like the internal diameters of pipes and tubing to produce thorough results.Combination of non-woven and coated abrasive materials is efficient for stock removal and finishing in one step. Medium (MED) grade abrasive


PFERD 48720 Cloth Ring, TH Hard Cloth Type, 3'' Diameter, 3/8'' Centre Hole, 7500 Max RPM (Pack of 5)
PFERD 48720 Cloth Ring, TH Hard Cloth Type, 3" Diameter, 3/8" Centre Hole, 7500 Max RPM (Pack of 5)
By Pferd
In Stock
$75.87

mpn: 48720,

4.0 out of 5 stars with 20 reviews
PFERD Cloth ring is used with polishing pastes for pre polishing and high-gloss polishing tasks. For very smooth finishes it may be recommended to use several, or even all, types in succession. Recommended for pre-polishing of aluminum and brass with grey polishing paste, and non-ferrous metals with brown polishing paste. Specification: TH Hard Cloth Type; 3'' Diameter; 3/8'' Centre Hole Diameter; 3/8'' Face Width; 2500 Recommended Speed RPM; 7500 Max. RPM.Cloth ring is used with polishing paste


Dedeco 12340 Carbide Bur, Double-Cut, Cylindrical Radius End, 1/4'' x 5/8'' x 1'', SC-6
Dedeco 12340 Carbide Bur, Double-Cut, Cylindrical Radius End, 1/4" x 5/8" x 1", SC-6
By Dedeco
In Stock
$28.75

mpn: 12340, ean: 7928183123404,

4.9 out of 5 stars with 36 reviews
Carbide Bur D/C Cylindrical-Rad 1/4'' X 5/8'' X 1'' (SC-6).1/4'' Shank Diameter. Cylindrical Shape with Radius End. SC-6 D/C Bur.


X-Buff (2-Ply, 1-1/2'' Dia., Very Fine Finish, 10 Pk.)
X-Buff (2-Ply, 1-1/2" Dia., Very Fine Finish, 10 Pk.)
By Silver Seal
In Stock
$49.71

mpn: 2725, ean: 0042864003575,

4.4 out of 5 stars with 27 reviews
2-Ply, 1-1/2'' Dia., Very Fine Finish X-Buff (10 Pack). Fine finish honing and polishing pads provid.


X-Buff (2-Ply, 1-1/2'' Dia., Med. Finish, 10 Pk.)
X-Buff (2-Ply, 1-1/2" Dia., Med. Finish, 10 Pk.)
By Silver Seal
In Stock
$49.73

mpn: 2724, ean: 0042864003568,

4.5 out of 5 stars with 21 reviews
2-Ply, 1-1/2'' Dia., Medium Finish X-Buff (10 Pack). Fine finish honing and polishing pads provide a.



Viewing Page 4 of 6

View more products in Buffing & Polishing Accessories.
Feel free to Browse Our Catalog.



Privacy Policy / Terms of Service / Accessibility Statement
© 2019 - groupmpublications.com. All Rights Reserved.