Abrasive Accessories - Page 3 - Huge Savings! Save up to 12%


Huge Savings! Up to 12% off on Abrasive Accessories at Group Publications, Page 3. Top brands include Llambrich, HHIP, Lawson, Norton Abrasives - St. Gobain, Anxingo, Fives (CITCO Tools | Gardner Abrasives), CME Tools, Supermotorparts, Lyndex-Nikken, Geiger, Exact Tooling, Amana Tool, Corona, & Techniks. Hurry! Limited time offers. Offers valid only while supplies last.



Llambrich JK Industrial Medium Duty Keyless Drill Chuck, 6JT Mount, 1-27/32'' Chuck Diameter, 1/32''- 1/2'' Capacity
Llambrich JK Industrial Medium Duty Keyless Drill Chuck, 6JT Mount, 1-27/32" Chuck Diameter, 1/32"- 1/2" Capacity
By Llambrich
In Stock
$98.23

mpn: JK-13 J6,

4.3 out of 5 stars with 32 reviews
JK Industrial is for medium duty industrial use. Available with threaded mounts for professional hand-held drilling machines. Also use with tapered mounts for stationary drilling machines. Fits up to 3/4'' diameter drill shank.JK Industrial is for medium duty industrial use. Available with threaded mounts for professional hand-held drilling machines. Also use with tapered mounts for stationary drilling machines. Fits up to 3/4'' diameter drill shank.


Pro Series by HHIP 3901-1242 Pro MT4 Morse Taper End Mill Holder-Drawbar End, 1-1/2''
Pro Series by HHIP 3901-1242 Pro MT4 Morse Taper End Mill Holder-Drawbar End, 1-1/2"
By HHIP
In Stock
$103.52
$102.89

mpn: 3901-1242, ean: 0769053080239,

4.6 out of 5 stars with 39 reviews
Pro-Series MT4 1-1/2'' Morse Taper End Mill Holder for single end mills. Made of 20CrMnTi alloy steel Electrolysis nickel coating ~ Drawbar End Thread: MT3- 1/2''-13~Balanced to 8,000 RPM~Tolerance is .0006'' Maximum Material is 42 CrMo~Hardness is HRC 50~52~Thread Tolerance Class is 4H-Class.For single end mills. Made of 20CrMnTi alloy steel!. For single end mills!. Electrolysis nickel coating. Balanced to 8,000 RPM.


Sprayon - LU711 The Protector Lubricant 11 oz aerosol (Pack of 12)
Sprayon - LU711 The Protector Lubricant 11 oz aerosol (Pack of 12)
By Lawson
In Stock
$82.58

mpn: 1143329,

4.8 out of 5 stars with 21 reviews
Sprayon LU711 All-Purpose Lubricant (The ProtectorTM) Aerosol is an ultra-thin film, transparent blend of high quality petroleum distillates formulated to ensure maximum moisture displacement. Its film resists the collection of abrasive particles on delicate contacts & connectors. This general maintenance penetrant is unmatched in its versatility & quality..


PART NO. NOR39184 Norton 66252939184, 7 x 1/8 x 5/8'', NorZon Plus Depressed Center Wheel Type 27
PART NO. NOR39184 Norton 66252939184, 7 x 1/8 x 5/8", NorZon Plus Depressed Center Wheel Type 27
By Norton Abrasives - St. Gobain
In Stock
$130.37
$124.65
You Save: 4%

mpn: NOR39184,

4.6 out of 5 stars with 19 reviews
PART NO. DGI-NOR39184 Norton 66252939184, 7 x 1/8 x 5/8'', NorZon Plus Depressed Center Wheel Type 27. Norton NorZon Plus depressed center wheels are manufactured with the exact combination of our proprietary Norton SG ceramic and zirconia grains in a free-cutting bond matrix that is appropriate for each primary application. These depressed center wheels are part of the Norton BEST product tier, providing the highest productivity and lowest total grinding cost.PLEASE READ FULL DESCRIPTION


CAT40 45° Pull Stud Retention Knob Fits HAAS CAT 40 CNC Tool Holder Mitsubishi Toshiba Daewoo OKK Kitamura Kira Kia, etc. (10-Pack)
CAT40 45° Pull Stud Retention Knob Fits HAAS CAT 40 CNC Tool Holder Mitsubishi Toshiba Daewoo OKK Kitamura Kira Kia, etc. (10-Pack)
By Anxingo
In Stock
$36.58

mpn: 202-5925, ean: 0743811540005,

4.7 out of 5 stars with 39 reviews
Product Code: 202-5925 Product description: Taper: CAT 40 A: 45 D1 Knob: 0.589'' D2 Neck: 0.392'' D3 Hole: N/A D4 Pilot: 0.6360'' L: 2.250'' L1: 0.988'' L2 Shou to End: 1.264'' Knob Socket: RKW40 Fits on Amura-Seiki, Fadal, comet, Daewoo, Dah Lih, Hass, Howa Kogyo, Ikegal, Kearny-Trecker, Kia, Kitamura, Mitsubishi, Miyano, OKK, Okuma Howa, Roku-Roku, Toshiba, Toyoda, YCI, SharpReplace Part Number: 202-5925.. 10 PCS CAT40 PULL STUD RETENTION KNOB FITS HAAS TOSHIBA.. Features: Taper: CAT 40


HHIP 3900-5100 Mini Quick Change Tool Post and Holder Set
HHIP 3900-5100 Mini Quick Change Tool Post and Holder Set
By HHIP
In Stock
$105.28

mpn: 3900-5100, ean: 0769053027821,

4.9 out of 5 stars with 50 reviews
Interchangeable with Aloris and DORIAN same series ~ 6 piece set includes 5 holders: No. 1 - Turning & Facing; No. 2 - Boring, Turning & Facing; No. 4 - Boring, Heavy Duty; No. 7 - Universal parting blade; No. 10 - Knurling, Facing & Turning. Set also includes a wedge type tool post. ~ Wedge Type with Swing Capacity up to 8'' ~ All working parts hardened and ground. ~ Completely sealed for maintenance-free operation. ~ Increases productivity of all lathe operations. ~ Precision design to assure


Gardner TruGARD HD, Heavy Duty, 15 Diamond Multi-Point Double disc Dressing System, Made in The U.S.A.
Gardner TruGARD HD, Heavy Duty, 15 Diamond Multi-Point Double disc Dressing System, Made in The U.S.A.
By Fives (CITCO Tools | Gardner Abrasives)
In Stock
$75.50

mpn: TruGARD HD,

4.8 out of 5 stars with 34 reviews
- Diamond dressing tool - 15 XL diamond multi-point -Heavy duty dressing applications - Most suitable for double disc grinding applications - Best used on 48-120 grit and finer aluminum oxide, resin bonded, silicon carbide, and plastic bonded wheels with diameters less than 48'' - Special shaped diamond provides consistent diamond contact in the work zone - Allows for less depths of dress - Increased wheel life up to 30% - Lower RA finishes can be achieved when used correctly - Diamonds are


2pcs ER32 COLLET CHUCKS 1''X6'' W. STRAIGHT SHANK,Tool Holder Set #ER32-CK1-new
2pcs ER32 COLLET CHUCKS 1"X6" W. STRAIGHT SHANK,Tool Holder Set #ER32-CK1-new
By CME Tools
In Stock
$66.00

mpn: ER32-CK1-2,

4.9 out of 5 stars with 18 reviews
DESCRIPTION: ''CNC Tooling'' Brands---The Best Quality on The Market----Sold Many Thansands to Distributors! * 2 PCS ER32 COLLET CHUCKS EXTENSION WITH 1'' X 6'' STRIGHT SHANK.-----2PCS TOTAL:$66.00 * Coolant thru. * 1'' diameter and 6'' long shank. * We stock ER32 collets 12pcs/set 1e/16 thru 3/4 by 1/16th-----only $48.00/set * We stock CAT40 retention knobs and ER32 Nuts----$5.00/each2pcs ER32 COLLET CHUCKS 1''X6'' W. STRAIGHT SHANK,Tool Holder Set #ER32-CK1--new.


Supermotorparts 10pcs New CAT 40 Pull Stud Retention Knob Fits Any HAAS CAT40 CNC
Supermotorparts 10pcs New CAT 40 Pull Stud Retention Knob Fits Any HAAS CAT40 CNC
By Supermotorparts
In Stock
$32.99

mpn: AMSUPBD7681, ean: 6941269986497,

4.4 out of 5 stars with 32 reviews
Description:Fits on any HAAS V mill, like VF, mini mill, EC, ES, etc.10 x CAT 40 Pull Stud Specification: With Coolant Through Hole Material: 40CR Taper: CAT 40 A: 45 D1 Knob: 0.589'' D2 Neck: 0.392'' D4 Pilot: 0.6360'' L: 2.250'' L1: 0.988'' L2 Shou to End: 1.264'' Feature: Strength comes from steel itself, and flexibility is from case hardened Can be used on both spindle coolant through and non-coolant through HAAS CAT40 V mill Pass hardness and anti crack test All black oxide . Improves


Lyndex 830-048 R8 Taper Shank Steel End Mill Holder, 1.89'' Nose Diameter, 3/4'' Hole Diameter
Lyndex 830-048 R8 Taper Shank Steel End Mill Holder, 1.89" Nose Diameter, 3/4" Hole Diameter
By Lyndex-Nikken
In Stock
$88.05
$77.39
You Save: 12%

mpn: 830-048, ean: 0201302181408,

4.0 out of 5 stars with 12 reviews
Lyndex R8 end mill holder. Through-spindle coolant capability. AT3 or better taper. Set Screws are included. Back-up screws not included. Ideal for milling and tapping. Quick and easy set up. Featuring the highest taper contact and high quality steel, our end mill holders provide extreme rigidity for even the heaviest machining applications. End mill inner bore T.I.R. less than 0.0002. up to 20,000 rpm speed. 1.89-inches nose diameter, 3/4-inches hole diameter. 2.37-inches length.Through-spindle


GEIGER 7575 Wheel Dresser with 1/2 Carat Diamond Tip
GEIGER 7575 Wheel Dresser with 1/2 Carat Diamond Tip
By Geiger
In Stock
$95.99

mpn: 7575,

4.6 out of 5 stars with 59 reviews
An amazingly accurate and simple to use tool that accommodates most any bench or pedestal type grinderRestore your grinding wheels back to perfection.. Complete with an extremely hard 1/2 carat industrial diamond tip..


Lyndex 160-064 16C Round Collet, 1'' Opening Size, 4.31'' Length, 2.26'' Top Diameter, 1.89'' Bottom Diameter
Lyndex 160-064 16C Round Collet, 1" Opening Size, 4.31" Length, 2.26" Top Diameter, 1.89" Bottom Diameter
By Lyndex-Nikken
In Stock
$69.80

mpn: 160-064, ean: 0201302098157,

4.7 out of 5 stars with 16 reviews
Lyndex line of high-quality 16C round collet offers M47.5 x P1.75RH external and 1-11/16''-20RH internal threads. 1-inches opening size, 4.31-inches length, 2.26-inches top diameter, 1.89-inches bottom diameter.16C collets have external and internal threads. 1-inches opening size. 4.31-inches length. 2.26-inches top diameter. 1.89-inches bottom diameter.


HHIP 3900-5352 Carbide Indexable Cut Off Individual Tool Block, 3.95'' Length x 1.5'' Width x 1.94'' Height
HHIP 3900-5352 Carbide Indexable Cut Off Individual Tool Block, 3.95" Length x 1.5" Width x 1.94" Height
By HHIP
In Stock
$49.55

mpn: 3900-5352, ean: 0769053029597,

4.4 out of 5 stars with 20 reviews
HHIP indexable cut off individual tool block product specifications: clamping height H (in): 0.750; blade height b (in): 1.25; clamping depth a1 (in): 0.790; block width a (in): 1.50; block height H2 (in): 1.94; shoulder depth H4 (in): 55 blade pocket m (in): 21 block Length C (in): 3.95. Blade fit: 32 3. 32 4, 32 5. 32 6.Brand: HHIP. Part Number: 3900-5352. Individual tool block.


KT Part#: 15250-44AP Ð Aluminum Soft Jaws for 15'' & 18'' Chucks - 1.5mmx60 - (7.500 L x 2.500 W x 2.500 H) Groove Width: 0.866 (22mm)/Screw: 20mm/Hole Space: 1.690 (43mm)/Hole to Front: 4.410
KT Part#: 15250-44AP Ð Aluminum Soft Jaws for 15" & 18" Chucks - 1.5mmx60 - (7.500 L x 2.500 W x 2.500 H) Groove Width: 0.866 (22mm)/Screw: 20mm/Hole Space: 1.690 (43mm)/Hole to Front: 4.410
By Exact Tooling
In Stock
$205.75

mpn: KT-15250-44AP, ean: 0689557261067,

4.7 out of 5 stars with 52 reviews
KT Part#: 15250-44AP Ð Aluminum Soft Jaws for 15'' & 18'' Chucks - 1.5mmx60 - (7.500 L x 2.500 W x 2.500 H) Groove Width: 0.866 (22mm) / Screw: 20mm / Hole Space: 1.690 (43mm) / Hole to Front: 4.410.


Amana Tool HO-138 60mm (2-3/8'') Dia Collet Chuck HSK type''F'' Tool Holder for EOC25/SYOZ25
Amana Tool HO-138 60mm (2-3/8") Dia Collet Chuck HSK type"F" Tool Holder for EOC25/SYOZ25
By Amana Tool
In Stock
$177.80

mpn: HO-138, ean: 0738685113882,

4.3 out of 5 stars with 48 reviews
CNC Adapters/Holder for Multiple Machines.


Corona AC7220 Leather Scabbard - 5 in
Corona AC7220 Leather Scabbard - 5 in
By Corona
In Stock
$86.10
$84.50
You Save: 2%

mpn: AC7220, ean: 0038313000813,

4.9 out of 5 stars with 58 reviews
(8) ea Corona Leather Pruner Scabbards Top Grain Leather Constuction, Stitched & Riveted For Durability, Belt Clip & Loops Included, Universal Design Fits Most Hand Pruners.(8) ea Corona Leather Pruner Scabbards. Top Grain Leather Constuction. Stitched & Riveted For Durability. Belt Clip & Loops Included. Universal Design Fits Most Hand Pruners.


Techniks CAT50 Jacobs Taper #5 (JT5) Tool Holder
Techniks CAT50 Jacobs Taper #5 (JT5) Tool Holder
By Techniks
In Stock
$115.32
$105.84
You Save: 8%

mpn: 22531, ean: 0650229411929,

4.1 out of 5 stars with 12 reviews
Techniks CAT50 Jacobs Taper #5 (JT5) Tool HolderOur Part # TEC-22531. 1.57'' Gage Length. Use with keyless Jacobs chucks. Superior accuracy Taper ground to AT3 standard.


Lyndex E40-016 ER40 Chromium Molybdenum Steel Standard Collet, 1/4'' Opening Size, 41.2mm Top Diameter, 31.2mm Bottom Diameter
Lyndex E40-016 ER40 Chromium Molybdenum Steel Standard Collet, 1/4" Opening Size, 41.2mm Top Diameter, 31.2mm Bottom Diameter
By Lyndex-Nikken
In Stock
$55.03

mpn: E40-016, ean: 0201302638056,

4.3 out of 5 stars with 22 reviews
Lyndex line of high-quality ER standard collet offers High Tensile Chromium Molybdenum Alloy provides greater hardness and less material deformation compared to traditional spring steel collets. Tolerance - Guaranteed to be within 0.0001-inches or better run out at the collet nose. Accuracy- Less than 0.0004-inches at 4 by diameter. Inspection - 100 percent collet inspection, checked 3 times for concentricity. 1/4-inches opening size. 0.250-inches - 0.219-inches collapse range. 41.2-millimeters


Techniks HSK63F ER32 Collet Chuck x 70mm Length
Techniks HSK63F ER32 Collet Chuck x 70mm Length
By Techniks
In Stock
$171.50

mpn: 30000, ean: 0650229416184,

4.8 out of 5 stars with 41 reviews
Techniks HSK63F ER32 Collet Chuck x 70mm LengthOur Part # TEC-30000. ER collet chucks handle a wide range of machining jobs without having to buy new tool holders. Simply choose the right size collet for the job, set tool depth, and tighten the collet nut to the proper torque using a torque wrench andtightening fixure.. Balanced to 25,000 RPM at G2.5. 0.0001'' runout from taper to pocket PowerCOAT nut included for 75% more clamping power. Use ''Power Coat'' nuts to increase the holding power


Amana Tool TE-122 CNC High Precision Tool Holder Extension 55/64 Dia x 1/4 Shank Dia x 1/4 Inner Dia x 5-1/2 Inches Long, Includes CO-296 for Collet ER-16 and Mini Wrench
Amana Tool TE-122 CNC High Precision Tool Holder Extension 55/64 Dia x 1/4 Shank Dia x 1/4 Inner Dia x 5-1/2 Inches Long, Includes CO-296 for Collet ER-16 and Mini Wrench
By Amana Tool
In Stock
$70.90

mpn: TE-122, ean: 0738685221228,

4.8 out of 5 stars with 12 reviews
High Precision Spring Collets, Extensions, Adapters Holders and Retaining Studs for CNC Machines are made by Amana Tool, the leading manufacturers of cutting tools. Using Amana Tool TE-122 CNC High Precision Tool Holder Extension 55/64 Dia x 1/4 Shank Dia x 1/4 Inner Dia x 5-1/2 Inches Long results in the very best tool performance. SPECIFICATIONS: (D) Diameter: 55/64; (d) Shank: 1/4; Overall Length (L): 5-1/2; Collet Standard: ER-16; L1: 4; Spring Collet Included: CO-296; D1: 1/4; Included Wren



Viewing Page 3 of 8

View more products in Abrasive & Finishing Products.
Feel free to Browse Our Catalog.



Privacy Policy / Terms of Service / Accessibility Statement
© 2019 - groupmpublications.com. All Rights Reserved.